Difference between revisions of "Main Page"

From berofix - professional SIP gateway
Jump to: navigation, search
Line 1: Line 1:
 
 
  
 
<table width="100%" class="wikitable" cellspacing="30">
 
<table width="100%" class="wikitable" cellspacing="30">
Line 60: Line 58:
 
* T.38 fax relay (V.27,V.29 and V.17)
 
* T.38 fax relay (V.27,V.29 and V.17)
 
* SIP over TCP  
 
* SIP over TCP  
* SRTP and TLS (available Q2 2011)
+
* TLS (SIP Signaling)
 +
* SRTPv(available Q3 2011)
 
* DSS1, EuroISDN conform
 
* DSS1, EuroISDN conform
 
* Q.SIG Basic-Features
 
* Q.SIG Basic-Features
* PCM Bus interconnection between berofix cards and even Boxes to enable hardware bridging for transparent voice, data and fax transmissions via optional PCM-Bus cable. (available Q4 2010)
+
* PCM Bus interconnection between berofix cards and even Boxes to enable hardware bridging for transparent voice, data and fax transmissions via optional PCM-Bus cable. (available in V2)
  
 
<br>
 
<br>
Line 113: Line 112:
 
* BF1E1,    1 Port PRI Lineinterface
 
* BF1E1,    1 Port PRI Lineinterface
 
* BF2E1,    2 Port PRI Lineinterface
 
* BF2E1,    2 Port PRI Lineinterface
* BF2S0FXS, 2 Port BRI and 2 Port FXS Lineinterface (available Q4 2010)
+
* BF2S0FXS, 2 Port BRI and 2 Port FXS Lineinterface
* BF4FXS,  4 Port FXS Lineinterface (available Q4 2010)
+
* BF4FXO,  4 Port FXO Lineinterface
* BF4FXO,  4 Port FXO Lineinterface (available Q4 2010)
+
* BF4FXS,  4 Port FXS Lineinterface (available Q2 2011)  
* BF2GSM,  2 Port GSM Lineinterface (available Q1 2011)
+
* BF2GSM,  2 Port GSM Lineinterface (available Q3 2011)
  
  

Revision as of 17:12, 24 March 2011

Berofix-phrase.pngBerofix-slogan.png


quickloads


Mailinglist

berofix-users: Subcribe to this mailinglist


The berofix product series is a powerful and flexible hardware solution to connect ISDN (BRI, PRI), analogue (FXO/FXS) and GSM lines to any SIP based VoIP system. berofix is not a classical Media Gateway nor a standard PCI/PCIexpress card where you have to install any drivers, therefore we call it a “Gateway card”. Due to the special design of the hardware berofix will be detected as a standard Realtek-Network card by the operating system. Usually the driver for this network card will be loaded automatically by the OS. The only thing you have to do is to set up the IP-address before you can access the web interface which is very easy to use. The berofix product series has a modular concept and supports the following hardware DSP based Voice-Processing features:


  • G.168/G.165 Echo cancellation with echo path change detection, up to 128ms
  • Codec translation: G.723.1 and Annex A, G.729a, G.726, G.711u/a
  • DTMF detection and generation
  • T.38 fax relay (V.27,V.29 and V.17)
  • SIP over TCP
  • TLS (SIP Signaling)
  • SRTPv(available Q3 2011)
  • DSS1, EuroISDN conform
  • Q.SIG Basic-Features
  • PCM Bus interconnection between berofix cards and even Boxes to enable hardware bridging for transparent voice, data and fax transmissions via optional PCM-Bus cable. (available in V2)


news

The berofix product series consist of a baseboard and the so called LineInterfaces. Each baseboard can carry up to two LineInterfaces. The berofix base boards are available as PCI or PCIexpress cards with the following channel densities:

berofix400 berofix1600 berofix6400
(4-16 channels) (16-64 channels) (64-120 channels)

The following Lineinterfaces are available and can be plugged on the berofix product series.

  • BF4S0, 4 Port BRI Lineinterface
  • BF1E1, 1 Port PRI Lineinterface
  • BF2E1, 2 Port PRI Lineinterface
  • BF2S0FXS, 2 Port BRI and 2 Port FXS Lineinterface
  • BF4FXO, 4 Port FXO Lineinterface
  • BF4FXS, 4 Port FXS Lineinterface (available Q2 2011)
  • BF2GSM, 2 Port GSM Lineinterface (available Q3 2011)


Additionally to the baseboard and the LineInterfaces the following accessories are available for the berofix product series:

  • bf4S0Bridge (to use all 4 RJ45 slots on a baseboard with one bf4S0)
  • bnTAdapters (to connect 2 BRI Lines on 4 RJ45 slots)
  • bnPCM Cable (to interconnect berofix baseboards)
  • bnE1Crosscable (to connect berofix E1 ports to other systems)

Due to the modular concept you can mix PRI, BRI, FXS, FXO and GSM Lineinterfaces on one card with full above mentioned features which makes the berofix cards very unique.